Litlhaloso tsa Aluminium Disc
| Lebitso la Lihlahisoa | Alloy | Bohloeki | Ho thatafala | Tlhaloso | |
| Botenya | Diameter | ||||
| Li-discs tsa Aluminium | 1050, 1060, 3003, 3105, 6061, 5754 joalo-joalo. | 96.95-99.70% | O, H12, H14 | 0.5-4.5 | 90-1020 |
Sebopeho sa Lik'hemik'hale (%) bakeng sa Li-discs tsa Aluminium
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ca | V | Ti | Tse ding | Min Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.5 |
| 1070 | 0.25 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | 0.04 | - | 0.05 | 0.03 | 0.03 | 99.7 |
| 3003 | 0.6 | 0.7 | 0.05-0.20 | 1.00-1.50 | 0.03 | - | - | 0.1 | - | - | - | 0.15 | 96.75 |
Thepa ea Mechini bakeng sa Disc Aluminium
| Khalefo | Botenya(mm) | Matla a tšepe | Elongation(%) | Standard |
| O | 0.4-6.0 | 60-100 | ≥20 | GB/T3190-1996 |
| H12 | 0.5-6.0 | 70-120 | ≥4 | |
| H14 | 0.5-6.0 | 85-120 | ≥2 |
Mokhoa oa ho Etsa Lipotoloho tsa Aluminium
Aluminium Ingot/Master Alloys — Melting Furnace — Holding Furnace — DC Caster — Slab — Hot Rolling Mill — Cold Rolling Mill — Blanking (punching into the circle) — Annealing Furnace (unwinding) — Final Inspection — Packing — Delivery
Lisebelisoa tsa Aluminium Circles
● Theatre le lisebelisoa tsa mabone a indasteri
● Lisebelisoa tsa ho pheha tse hloahloa
● Ho kenya moea ka indasteri
● Lirimo tsa mabili
● Livene tse tsamaisang thepa le litereilara tsa litanka
● Litanka tsa mafura
● Likepe tsa khatello
● Likepe tsa pontoon
● Lijana tsa cryogenic
● Aluminium Utensil Top
● Aluminium Tadka Pan
● Lebokose la Lijo tsa Motšehare
● Aluminium Casseroles
● Aluminium Fry Pan
Tlhaloso e qaqileng
